Starlink Mini-Halterungen

Built for RVs, Overland Vehicles, Trucks, Vans, Boats, UTVs, Service Vehicles, Semi Trucks, Heavy Machinery, First Responder & Commercial Applications

Limited time special: buy any Starlink Mini mount and get a free 12 volt cable in 6, 10, 15 or 25 foot lengths ($29–59 value).

You’re in good company with SatGear

Explore the businesses, agencies and organizations that have purchased our mounts and cases.

Browse by industry

  • SpaceX
  • Lockheed Martin
  • Sikorsky
  • Microsoft
  • Meta
  • Siemens
  • ExxonMobil
  • AT&T
  • USDA Forest Service
  • National Park Service
  • Warner Bros. Discovery
  • Ventura County Fire Department
  • Aramark
  • T-Mobile
  • Chevron
  • Toyota
  • General Motors
  • New York State Police
  • COSCO Fire Protection
  • American Medical Response

Frequently Asked Questions

How do I choose the right mount for my Starlink Mini?

Start with where you want to install your Starlink Mini, how much protection you need and whether you want a removable setup or a permanent installation.

Our SM, MM and PM series offer different mounting options and levels of protection. Choose the series that fits your needs, then select the mount and compatible attachments for your installation.

What’s the difference between the SM, MM and PM series?

All three series are designed for Starlink Mini but offer different approaches to mounting and protection.

The SM Series provides a lightweight aluminum mounting solution with several installation options. The MM Series adds an enclosed aluminum housing and a polycarbonate top cover. The PM Series uses marine grade HDPE with an integrated protective top shell.

Available attachments and installation options depend on the model you choose.

Which SatGear Mini mounting series is the most versatile?

The MM Series is our most versatile lineup for Starlink Mini. It’s the best fit for customers who want a mounting system that can adapt to different vehicles, locations and applications.

With compatible brackets and attachments, the MM Series can be used on roof racks, headache racks, spare tires, poles, vertical surfaces and compatible truck beds. The MM1 can also mount directly to a suitable vehicle roof using magnets or suction cups. For vertical surfaces, our VSM supports compatible magnet and suction cup configurations. Tripod mounting and interior glass roof mounting with the MM5 provide even more options.

We’ll continue expanding the MM Series with additional brackets and attachments. Planned additions include mounting options for snowmobiles, boats and side by sides, giving you more ways to use your existing mount as your needs grow.

What’s the idea behind SatGear’s Mini mounting systems?

Our goal is simple: start with a core mount and build on it as your needs change. Think of Milwaukee or DeWalt cordless tool systems: within each compatible battery platform, the same battery can power many different tools. Our SM and MM mounting systems follow a similar approach, allowing you to add compatible brackets and attachments while keeping your core mount.

Each series already offers a range of mounting options. We’ll continue introducing new brackets and attachments as our customers’ needs grow so you can expand or adapt your setup over time.

Can I move the same MM1 mount between different vehicles?

Yes. The MM1 is an extremely versatile protective mount for Starlink Mini. You can leave compatible brackets and attachments installed on different vehicles and move the same MM1 from one setup to another.

For example, use your MM1 on a spare tire mount on one vehicle, then move it to a roof rack using our MM4 or MM5 bracket kits. You can also use that same MM1 on a vertical surface with our VSM or in a compatible truck bed with our truck bed mounting attachments. If your vehicle has a headache rack, you can mount the MM1 using our headache rack brackets.

For a vehicle roof setup without additional brackets, you can screw compatible magnets or suction cups directly into the MM1. Use magnets on a suitable steel surface or suction cups on a smooth, nonporous surface where each cup can form a complete seal.

We’ll be introducing even more brackets and attachments in the near future for different applications and needs. The goal is to give you more ways to use the MM1 you already own as your setup changes.

Can I mount my Starlink Mini without drilling?

Yes. Many of our Mini mounts offer compatible magnet or suction cup options for installation without drilling.

Magnets require a suitable steel surface. Suction cups require a clean, smooth, nonporous surface where each cup can form and maintain a complete seal. Choose the mounting method that suits both your mount and your installation surface.

Where can I install my Starlink Mini?

Depending on the mount and attachments you choose, we offer options for vehicle roofs, roof racks, headache racks, poles, vertical surfaces, spare tires and compatible Ford truck beds.

Selected mounts also support interior glass installations or tripod use. Each configuration has its own fit requirements, so check the specific mount and attachments for your intended location.

Can I mount my Starlink Mini inside my vehicle on a glass roof?

Yes. Our SM1, SM2, SM3 and MM5 mounts support interior installation on suitable sunroof or panoramic roof glass. For the MM5, reverse the suction cups so they face upward toward the glass instead of downward.

The glass area must be large enough for the complete setup with enough clearance for the mount and a suitable sealing area for every suction cup. Confirm fit and test reception in your intended mounting position.

Can I use my Starlink Mini on a tripod?

Yes. All of our SM Series and MM Series mounts are compatible with tripod mounting. They have a built in threaded mounting hole with a 1/4 inch diameter and 20 threads per inch. It accepts the mounting screw found on most tripods.

This gives you another way to set up your Mini away from your vehicle and raise it off the ground. Check the tripod’s mounting connection and weight capacity before use.

Can I remove my Starlink Mini from my roof rack without removing the entire mount?

Yes. The MM3 uses a two piece tray system that allows the base tray to remain attached to your roof rack.

Removing four bolts releases the upper tray holding the protective mount. This lets you take your Mini to another location while leaving the roof rack base in place.

Are brackets and attachments interchangeable between all SatGear Mini mounts?

Most of our brackets and attachments are interchangeable between SM Series and MM Series mounts. There are a few exceptions, so check the compatible models listed for each bracket or attachment before ordering.

Our mounting brackets and attachments are designed for the SM and MM Series only. The PM Series does not support these brackets or attachments.

Are magnets, suction cups and Starlink Mini equipment included with my mount?

What’s included depends on the product and mounting option you select. Some options include magnets or suction cups while hardware only options do not. Other brackets and attachments are sold separately unless listed as part of your selected configuration.

The Starlink Mini satellite internet system is sold separately.

Can I power my Starlink Mini from my vehicle’s 12V outlet?

Yes. We offer a 12V DC power cable designed to connect Starlink Mini directly to a compatible vehicle cigarette lighter outlet.

Choose a cable length that reaches your mounting location and allows for secure routing. Whether a cable is included depends on the product and options you select.

Can I use Starlink Mini while my vehicle is moving?

In motion use depends on your Starlink hardware, service plan, location and mounting configuration. Choose a mount suited to your installation and follow its installation instructions.

Before using Starlink Mini while traveling, confirm that your equipment and service plan meet Starlink’s current requirements for in motion use in your location.

SatGear Starlink Mini-Halterungen: Der perfekte Begleiter für digitale Nomaden, Offroader, Wohnmobilfahrer, Overlander und mobile Unternehmen, die Schutz und Konnektivität suchen

Made in the USA

Our Mounts are Proudly Made in the USA

Kundenservice

Rufen Sie an - (530) 721-9730
E-Mail - support@satgear.com
Mo – Sa, 8:00 – 18:00 Uhr PST

30 Tage Rückgaberecht

Rückgaberecht innerhalb von 30 Tagen