Starlink Mini Vertical Surface Mount

Integrated Starlink Mini Protection

The included MM1 Protective Mount features a precision-engineered aluminum frame and a durable 5mm polycarbonate cover that shields your Starlink Mini from debris, weather, vibration, and impact while maintaining full satellite signal performance.

Adjustable Angle for Optimal Satellite Performance

The MM6 features built-in ±10° tilt adjustability, allowing you to fine-tune the orientation of your Starlink Mini to compensate for angled vehicle panels or mounting surfaces. This ensures optimal satellite alignment and maximum connection reliability.

Electronic Suction Cup Option (Optional)

Optional electronic suction cups automatically monitor suction pressure and re-pump themselves whenever vacuum drops below 80%, eliminating manual maintenance. Rechargeable via USB, they operate for approximately 2–3 weeks per charge and are water-resistant for reliable outdoor use.

Built for Real-World Mobile and Field Use

Constructed from high-grade aluminum and finished with a durable powder coat, the MM6 is engineered to withstand vibration, weather, and demanding real-world conditions while keeping your Starlink Mini secure and protected.

Key Features

Three Mounting Methods: Choose 6-inch manual or electronic suction cups, 3.5-inch magnets, or permanent installation with the pre-drilled U-brackets for temporary or fixed setups.
Heavy-Duty 6-Inch Suction Cups: Large cups provide a wide contact area for secure mounting. Choose manual pump cups or optional electronic cups to suit your installation.
Optional Self-Pumping Electronic Cups: Automatically re-pump when vacuum drops below 80%. USB rechargeable and water-resistant, with approximately 2–3 weeks of operation per charge.
Quick Deployment: Set up quickly for travel, field work or temporary installations, then reposition as your needs change.
High-Grade Aluminum Construction: Durable aluminum housing protects your Starlink Mini while providing a clean, professional appearance for vehicle or fixed installations.
5mm Polycarbonate Cover: Helps shield the dish from debris, outdoor exposure and damage during transport or storage, while allowing satellite signals to pass through.
Adjustable Tilt: Fine-tune the dish angle by approximately ±10° to compensate for sloped vehicle panels or other mounting surfaces and improve satellite alignment.
Mobile and Permanent Installations: Designed for vertical mounting on RVs, semi trucks, fleet vehicles, trailers, heavy equipment, emergency vehicles and fixed structures.
Weather-Resistant Design: Helps protect your Starlink Mini from rain, snow and outdoor exposure during mobile or permanent use.

Product Specifications

Package Includes: MM1 Protective Mount + VSM (Vertical Surface Mount)
Material: High-grade aluminum
Cover: Strong 5mm polycarbonate
Compatibility: Starlink Mini
Weather Resistance: Yes

Frequently asked questions

What is the MM6, and what is included?

The SatGear MM6 combines the MM1 Protective Mount with the VSM (Vertical Surface Mount) attachment. Together, they let you install and protect a Starlink Mini on vertical surfaces. Magnets, manual suction cups or electronic suction cups depend on the mounting option you select. The Starlink Satellite Internet System is sold separately.

You can also hard mount the MM6 without magnets or suction cups using the included U-brackets. Screw the U-brackets directly into a vertical surface through their pre-drilled holes, then use the thumb screws to attach the VSM to the U-brackets. This gives you three installation options: magnets, suction cups, or a hard mount with screws.

How easy is it to detach the MM1 from the VSM (Vertical Surface Mount)?

It is simple. The MM1 Protective Mount (the top piece of the MM6) attaches to the VSM (Vertical Surface Mount) with four included Allen screws. Remove those four screws to detach the MM1.

If you plan to detach it frequently, you can replace the Allen screws with optional thumb screws from our Accessories page for quicker removal by hand. This makes it easy to move your MM1 to other compatible SatGear setups, such as a spare tire mount, the MM3 roof rack tray or a pole mount.

Can I mount the MM6 without drilling?

Yes. Choose suction cups for a suitable smooth surface or magnets for a suitable steel surface. Both options allow installation without drilling. The MM6 also supports permanent installation with screws or bolts through its pre-drilled U-brackets.

Where can I install the MM6?

The MM6 is designed for vertical surfaces such as vehicle side panels, RV walls, trailers, semi trucks, vans, service bodies, equipment enclosures and shipping containers. Choose suction cups, magnet cups, or use the included U-brackets for a permanent installation with screws.

What is the difference between the manual and electronic suction cups?

Both options use two large 6-inch suction cups. The manual version uses a hand-operated pump. The optional electronic version monitors suction pressure and automatically re-pumps when vacuum drops below 80%. The electronic cups are USB-rechargeable, water-resistant and operate for approximately 2–3 weeks per charge.

What surface do the MM6 suction cups need?

The 6-inch suction cups can be used on smooth vertical surfaces such as glass and metal, including vehicle panels, RV walls, heavy machinery and utility vehicles. Each cup needs a clean, flat area at least 6 inches across, without indents or ridges that interrupt the seal.

The surface does not have to be perfectly smooth. The suction cups can also work on lightly textured vertical surfaces, such as textured powder-coated panels or the flat areas of shipping-container walls, as long as each cup forms and maintains a complete seal.

How strong are the MM6 magnets?

The MM6 magnetic mounting option uses two ultra-strong magnets, each rated at over 130 pounds of pull force, for over 260 pounds of combined pull force. They attach to suitable steel panels and allow fast installation and repositioning. Check that your mounting panel attracts a magnet.

Can I permanently mount the MM6?

Yes. Permanently fasten the included U-brackets to a vertical surface with screws or bolts, then attach the VSM (Vertical Surface Mount) to the U-brackets using the thumb screws. You can leave the U-brackets installed and remove the VSM whenever you need to move it.

Additional sets of U-brackets let you prepare multiple mounting locations and move the same VSM between them. For example, leave one set of U-brackets screwed to a shipping container, then move the VSM to another location using a second set of U-brackets fitted with magnets or suction cups for use on an RV or utility vehicle.

You can purchase extra U-brackets from our Accessories page to create the setups you need.

Can I adjust the angle of the MM6?

Yes. The MM6 provides approximately ±10° of tilt adjustment so you can fine-tune the Starlink Mini’s orientation and compensate for angled vehicle panels or other mounting surfaces.

How does the MM6 protect Starlink Mini?

The included MM1 Protective Mount has an aluminum housing and a durable 5mm polycarbonate top cover. It helps protect the Starlink Mini’s top, bottom and edges from debris, vibration, impact and outdoor exposure. Think of it like a phone case combined with a screen protector for your Starlink Mini.

Are magnets and suction cups included with every MM6 order?

They depend on the mounting option you select. Available choices include hardware only, rubber magnets, manual suction cups, electronic self-pumping suction cups, or suction cups combined with rubber magnets. The hardware-only option does not include magnets or suction cups, but it does include the U-brackets for hard mounting the MM6 to a vertical surface using screws.

Fabricado en EE. UU.

Nuestros soportes se fabrican con orgullo en EE. UU.

Atención al cliente

Teléfono: (530) 721-9730
Correo electrónico: support@satgear.com
De lunes a sábado, de 8:00 a 18:00 PST

Devoluciones en 30 días

Devoluciones hasta 30 días, sin preguntas

The MM6 is

The MM6 is awesome

Excellent product

The product is made very well and it also looks Good. It does a very good job protecting your Starlink .

24/7 SatGear MM6 Starlink Mini Vertical Surface Mount on our 5th-gen Ram 3500

We installed the SatGear MM6 Starlink Mini Vertical Surface Mount on our 5th-gen Ram 3500, and our Starlink stays mounted on the truck 24/7, 365 days a year.

We tow, travel, work around the ranch, spend time off-grid in Northern Arizona, and rely heavily on Starlink wherever we go. Because of that, we needed a mounting system that could become a permanent part of the truck—not something we had to set up and tear down every time we wanted internet.

The MM6 has been a perfect fit for that.

The mount feels extremely solid, the Starlink Mini sits securely, and the entire setup looks clean and purpose-built on the Ram. It doesn’t look like an aftermarket piece we threw together—it looks like it belongs on the truck.

One of our favorite features is the electric automatic suction cups. They make attaching the system incredibly simple while still giving us the confidence to keep our Starlink mounted full-time. The system is so easy to use that even our kids can help mount the dish.

That says a lot about how simple and well thought out the design is.

For our family, Starlink isn’t something that gets pulled out of a storage compartment when we reach camp. It is part of the truck and stays ready to go every single day of the year.

Whether we're towing, exploring Northern Arizona, working around Stewart's Ranch, or traveling somewhere with little to no cell coverage, our internet is already mounted and ready.

SatGear is a sponsor of Stewart's Ranch, but we only recommend products we actually use. The MM6 lives on our Ram 3500 24/7/365, and that is probably the best endorsement we can give it.

If you use a Starlink Mini on a work truck, tow rig, RV, overland build, or off-grid vehicle and want a clean, secure setup you can leave mounted full-time, the SatGear MM6 is absolutely worth checking out.

— BWheelz | Stewart's Ranch